Leave a message if your washing machine freezes:
Washing machine freezesThe washing machine sets the washing time depending on the mode you choose. It can range from 30 minutes to several hours. Sometimes the washing time varies slightly due to external causes, such as low water pressure in the pipes, rewinding the laundry while washing, etc. However, if the washing machine does not perform the washing program for 2 hours, but significantly longer, it is a cause for concern and most likely the washing machine freezes.
Installation error or pump breakage
First, a long wash can be mistaken for a so-called self-draining of water from the tank. Spontaneous draining of the water from the tank of the machine occurs when during its installation have not taken into account all the requirements of the manufacturer and the drain hose is not secured at the required height. If the water drain hose is not raised to the level of the roof of the machine, the water will flow out of the tank into the sewer, and the machine will continue to draw water. This can go on for quite a long time, in this case the washing machine freezes because the water level sensor does not give the command to start washing, because there is not enough water in the tank. Fasten the drain hose at the height indicated in the manual, and the problem will solve itself.
It also happens that the water drainage is caused by a broken drain pump. Therefore, if the drain hose is properly secured, water is still leaking and filling - only the replacement of the pump will help.
A clog in the drain hose, pump filter or connections
A clog in the drain hose will prevent the water from flowing properly. And since the water will flow away slowly, the washing time will increase. Small objects left in pockets, as well as lint, hair and threads can eventually clog the drain hose or filter, so these components of the washing machine must be cleaned periodically.
Faulty heating element
During washing, the washing machine heats cold water to the desired temperature. If the heating element begins to work intermittently, and the time to heat water to the desired temperature increases, and the washing machine freezes.. The only solution in this situation is to replace the faulty part
The electronic module is broken
Failure in the washing program can also be caused by a breakdown of the electronic control module. To repair the electronics, it is best to call a master repairman.
Thus, when the washing machine freezesThere are objective reasons for this. The main ones we have named in this article, but their elimination is better to trust a professional.
Leave a request and the master will call you back:
