Leave a request if your machine won't spin and a technician will call you back:

One option for washing machine breakdowns is when your washing machine won't spin, which means the drum stops spinning and the laundry won't wash.

What to do first if Washing machine doesn't spin?

If the washing machine does not spin, the first thing to do is to disconnect it from the mains, i.e., cut off the electricity supply. Then you need to carefully drain the water, this is done in the case when malfunction occurred during washing, when the machine has already filled with water. Drain through a special filter, which is most often placed on the front front bottom.

The stage of failure

The next step is to determine when the washing machine stopped. The options may be as follows:

• The washing machine does not spin from the moment of spinning - in this case, there will be a minimum of water in the machine, the laundry will be fully or partially rinsed from the soap, but not squeezed.
• During washing. If the drum is jammed during washing, then after opening the door you will find wet and soapy laundry inside. In this case, it is worth checking whether it is possible to manually rotate the drum .
• In the case if the drum of the machine by hand rotates without any problems, but does not spin during the washing, then the reason for this situation may be a trivial overload of the machine with laundry. In this case, the washing machine does not spin the loaded amount of laundry, as it is designed for a smaller volume.
• "Smart" washing machines will show an error code on the electronic display, if such a function is not provided in the machine - it simply stops.

Tip. Try to unload some of the laundry and run the machine again, perhaps the problem will be solved.

If, however, when reducing the load the washing still does not start - then the reason may be more serious than just exceeding the recommended load.

Some causes of failure if the washing machine stopped spinning

The main reasons why the washing machine does not spin.

- The belt that drives the drum is damaged (the belt is frayed, loose or torn). Remedy: The drive belt must be replaced.

- The motor brushes are worn (frayed). Remedy: Replace the brushes.

- Breakdown in electronics. Remedy: Reprogramming or replacement of the electronic module.

- Switching the machine on with a load of laundry causes the plugs on the electrical panel to blow out. Most often it is due to a breakage of the starter winding or rotor. Solution: disassembly and diagnostics, motor replacement.

- The motor is out of order. Solution: repair or replace the motor.

These are only some of the causes. A modern washing machine is quite a complicated mechanism, you should not try to repair it yourself, not knowing all the subtleties and nuances of its device. Determine and fix the problem, most often only a specialist will be able to do it, Check the price here.

If you are faced with the fact that the washing machine does not spin, contact the specialists of the service center or a repair shop.

It usually looks like this:

Leave a request, a technician will call you back: