Washing Machine Won't Heat Water

Leave a request if your machine doesn't heat up and a technician will call you back:

Are you faced with your washing machine not heating water?

Heating water - The main point that affects the quality of washing. The convenience of using an automatic washing machine is due to the fact that during the washing it itself heats the water to the desired temperature. This is especially true in homes where there is only a cold water supply.

How to detect a breakdown when the machine does not heat?

When we take the laundry out of the machine at the end of the wash cycle, it's cold. And this is logical, because the rinsing most often happens only with cold water.

The first bell may be the fact that the laundry has become poorly washed. In addition, if washing machine does not warm water, then after washing the clothes may have an unpleasant smell.

In order to understand whether or not washing machine is not heating water.It is enough to touch the door during the main washing cycle. If the door remains cold for half an hour after turning the machine on in washing mode, the washing machine is not heating the water.

Options for malfunctions in the absence of heating of the washing machine:

1. Faulty water level sensor does not transmit a signal to the heating element. During operation, the sensor can get clogged, which leads to malfunctions. Solution: remove the blockage or Sensor replacement.
2. Breakage of wires of the heating element. A break in the electric circuit of the heating element may well cause a problem when the washing machine does not heat water. Most often there is mechanical damage to the wires during the operation of the machine (vibrations during washing and spinning), or the wires can simply burn out over time. Solution: replace the wires with new ones or solder the old ones.
3. The heating element is out of order. This breakdown is diagnosed by a technician with a special tester. Solution: replacement of the faulty part.
4. The washing machine does not heat water due to scale formed on the heating element. Preventive measures: During the washing add special agents softening water or install the filter with water softening cartridge. Remedy: Replace the heating element.
5. The thermostat is defective. Remedy: Replace the sensor.
6. The control module is defective. Solution: replace the module.

All prices for troubleshooting, you can see hereor order a callback.

The automatic washing machine is our daily helper in the home. Repair and replacement of parts of this complicated mechanism, in most cases is made only by a master. Therefore, if you have detected a breakage - do not suffer, refer to a service center or call a master-repair technician.
Leave a request for repair: