Leave a request to call a master:
The washing machine is one of the basic and irreplaceable household helpers. And if it breaks down, it is a big trouble for the owner. With some faults can easily cope with itself, and to fix some of the failures will have to call a master of repair washing machines. Regardless of what brand or model of washing machine you have Indesit (Indesit), Bosh, Ariston (Ariston) and many others, the causes of malfunction can be the same.
Consider the main faults of washing machines:
The washing machine does not turn on
The fact that the washing machine won't turn on may not actually be as scary as it is. There are some probabilities and surprises:
- Power or voltage is out.
- The plug is not inserted or is not fully inserted into the outlet, or the plug is not working properly.
- Tumbler hatch door is not closed. You should hear a click when the door closes tightly.
- The control of the electronic system has malfunctioned and stopped working. Only an expert can help here, he or she will make Diagnose This can only be helped by a specialist who will diagnose and fix the problem.
The washing machine is leaking
Improper use of the washer-dryer can result in A tear in the rubber seal of the door. The sealing rubber around the door may be damaged, torn by a foreign and piercing object, or worn out. Also causes may be:
- A torn drain hose or cracked spigot.
- Failure of the outer drum.
- The washing machine's snail is damaged.
The washing machine does not remove water from the drum
Since the water does not leave the drum of the washing machine, you need to look for the cause in the pump. It could be:
- A clogged drain pump, or its malfunction.
- Clogged drain filter.
- Wrong washing mode (without spin).
To find out if the sewer is clogged, you must disconnect the drain hose from the sewer pipe, drop it in a bucket and turn the machine in drain water. If the water poured from the hose, it means that you have a clogged sewer, which must be cleaned.
The washing machine does not spin the drum
You see that the drum of the washing machine does not spin the laundry, and the things in the washing machine remain wet. Check if the washing mode is correct, you may have selected a mode without spinning. If the mode is okay, look for the cause:
- A defective drive belt.
- Worn bearings.
- The electronic control module is defective or has failed.
- The motor does not work, or maybe burned out.
Washing machine does not heat water.
The main reason is the heating element TEN, which has failed, i.e. burned out. Also the reason can be :
- The heating relay is out of order and has failed.
- The sensor indicating the water heating fails.
Washing machine makes noises.
- Bearings are faulty.
- Object in tank.
Machine does not spin up properly
- Foreign object in tank.
- Electronic control module is faulty or has failed.
- Motor brushes are defective.
- The washer-dryer washer-drive is out of order.
For a long life of the washing machine it is necessary to install it correctly, not to load it above the norm and not to switch washing modes while the washing machine is running.
Leave a request for repair:
