We recommend trusting a professional, leave an application for repair:
The pump filter is a significant part of the CMA, which acts as protection against contamination, than naturally prolongs its working condition. It is placed practically at the bottom of the washing machine and hidden behind a small door, where you can remove the filter yourself and clean it, if it helps, you will not need repair.
How often to perform a dirt cleaning in the washing machine?
Most people don't even know that it needs to be cleaned from accumulated dirt every month, which results in the pump breaks of the washing machine or the machine leaks. There are three variations of access to do this:
1.There are machines in which the filter is not provided by the device. In this case, you need to access the pump and its nozzles from the middle of the washing machine and do the cleaning of the clogged area.
2. The filter can be hidden behind a small hatch door, which is closed very tightly and opens simply by hand or something thin, it is reached by unscrewing counterclockwise.
3.Behind the rectangular panel, it is attached on swivel hooks or latches. In the first version, the hooks must be turned to a horizontal position, in the second - slowly and carefully unscrew the latches, while excluding them from the hooking. In some models of washing machines, the latches are excluded from the hook by side shift. The filter is pulled the same way.
The washing machine does not unscrew
Sometimes it happens that the filter in addition to the thread is attached by a captive screw. It must be unscrewed, only then you need to unscrew the filter itself. If this procedure has not been done for a long time, unscrewing may be very difficult. The force must be controlled so as not to destroy the filter itself. It is better to get access to a very tight version from the pump and the pipes.
When there is limescale on the threads, it will not be so easy to get. You need to remove the whole with "volute" and with special tools hack it out of its seat to put a new filter or you will need to change it together with the volute.
To do the cleaning it is necessary to bend the washing machine back, put a flat container under the hatch. Carefully unscrewing the filter, little by little drain off the water.Then take it out completely and free it from deposits of debris.
Part of the dirt may remain in the filter placement hole. This can be detected by shining a flashlight into the hole. It should be cleaned, and then put the filter back in its original position and test the washing machine in drain mode.
The dirtiest and most clogged filters may not unscrew. In an episode like this, it is possible to get to it from the middle, after which you will need to Change the pump at an affordable price.
Cheaper CMAs do not have a pump filter at their disposal. To eliminate clogs in them, it is necessary to remove the entire wall of the washing machine to find and perform their cleaning.
The filter is clean? But the machine still does not drain?
Leave a request, we will help you with repair!
