Leave a request for a call to the technician:
Your own diagnostics of the washing machine at home
Independent diagnostics Washing machine self-diagnostics is rather troublesome and not easy. The number of manufacturers and produced models of washing machines counts today dozens and even hundreds. And they differ not only in a set of functions, as it may seem to the consumer, but also have specific design features.
Here we will try to consider the most frequent breakdowns and in general, here are ways to diagnose the washing machine.
It is difficult to drain water from the tank
Typically, if the washer won't emptyThe main culprits are a clog in the drain filter or pipe, a foreign object in the pump, or a broken drain pump. You can clean the pump or filter yourself. But since most often the cause of all the same in the breakage of the drain pump, it is better to call a master or take the machine to the service.
Water during the washing does not heat up
Diagnosing this breakdown of the washing machine is not so difficult. If the laundry has become badly washed or has an unpleasant smell after the end of washing and spinning, then most likely it was washed in cold water. Run the machine on one of the modes that should use water heating, and touch the door of the machine. If the hatch is cold for half an hour after starting - the machine is definitely not heating water.
The reason is most often that the heating element installed in your washing machine has failed. In this case, only the replacement of this element will help.
Noise during operation
When washing machine makes noise, diagnosis of the causes of this malfunction is carried out.
The most frequent cases are when some object, such as bra bones, buttons, etc., enters the space between the tank and the drum. To understand if this is the reason, simply rotate the drum several times when the machine is turned off. If you hear a noise when spinning, then it is a foreign object that interferes with the normal rotation of the tank.
Remove the foreign object will help washing machine repairman.
Noise at the moment of water drainage indicates a faulty drain pump. Too loud operation during the spin suggests that the bearings are out of order.
Drain pump or bearing replacement is not available to everyone. To do it at home is quite problematic. Qualitative repair and accurate diagnosis of the washing machine in this situation will provide only a specialist repair shop.
The drum does not rotate
When the drum does not rotate - the washing is impossible. This is clear to everyone. Why does this happen? Perhaps the drive belt broke, or the electronic module failed, and it is also possible that the motor broke or the drum just jammed. As you can see, there could be many reasons.
Each of the causes of washing machine breakdown requires responsible diagnosisand then quality repair. It is better to entrust the repair of complex equipment to professionals.
Leave your request and we will solve your problem:
