The washing machine vibrates and bounces when spinning? What to do? Tips + Video

washer_jumps_wash_what_to_do — Transparticular bolts are not removed

You should not laugh at the words "washing machine jumps", in fact, it is not funny at all. I think everyone is well aware that in such a case, there is clearly something wrong with the washing machine. There are annoying factors, such as loud banging and vibration. Well, and accordingly, some kind of malfunction can easily occur.

Contents .

The washing machine jumps when spinning. What to do?
Why does the washing machine jump?
Probable malfunctions that cause the washing machine to jump when spinning:

The washing machine jumps when spinning. What to do?

If you are faced with your washing machine bouncing, do not give up and do nothing, because the consequences can be dire. If the power cord is longer than the drain or water intakeThe latter can easily disconnect, and voila, you'll have to wear rubber boots.

Let's try to focus and figure out why your machine jumps.

Why does the washing machine jump?

In most cases, this problem occurs when you turn on those

washer_jumps_washer_jumping — What to do if the washing machine jumps when spinning?

Washing machines that have just been installed.

Consider the possible causes:

Maybe you forgot to remove the bolts that block the drum during transport? Washing with these bolts seriously interferes with the normal operation of the machine and contributes to a lot of wear and tear on the main components. Be sure to check that there are no shipping bolts on your washing machine.
If the first point does not apply to your machine, then most likely the problem is improper installation. The washer must stand perfectly flat, relative to the horizontal plane. It is clear that the floor in your house may not be perfect, so there is a provision for adjusting the position of the washing machine with its feet. Try to set the washing machine so that it does not wobble and stands steadily.
In rare cases, the cause of the washing machine bouncing may be too smooth a floor. In this case, place the machine on something anti-slip, such as a rubber mat or special footrests.

In case the problem appeared not after the installation of the machine, but after its normal long-term use, the problem may be an uneven distribution of laundry or overloading. Your machine may be struggling to to spin the drumBut too much of the portion of the loaded laundry it is being rocked. Try to load the laundry more rationally and evenly, maybe the problem will disappear.

If none of the above helped you, most likely we are talking about a more serious malfunction, for the elimination of which you will have to call a specialist.

Probable malfunctions, due to which the washing machine jumps when spinning:

Malfunction	Possible reason	Repair cost
Damper or shock absorber is defective.	Worn shock absorbers or dampers. Their main task is to soften vibrations at high revolutions of a drum. With decent wear they don't always cope with this. In this case, you can hear a characteristic knocking of the shock absorber against the body of the washing machine. Shock absorbers should be replaced. As a rule, they are replaced in pairs.	Starting at $10.
The springs are defective.	The springs serve as a supplement to the shock absorbers. When they are worn, it is also impossible for the washing machine to function properly. It starts bouncing when spinning.	Starting at $10 or more.
The counterweight is defective.	It is loose or has begun to deteriorate. What is a counterweight? It is a heavy element that stabilizes the washing machine and damps its vibrations. Most often it is made of concrete. As a rule, it is the bolts of its fasteners that are damaged, but it is possible that the counterweight itself has begun to crumble. You should replace the mounts, or the counterweight itself.	Starting at $10.
Faulty bearing is defective ..	The bearing has probably begun to rust and fail due to moisture ingress. When it is worn, the machine first grinds unpleasantly, then begins to vibrate strongly when wringing. It is forbidden to operate such a machine! The bearing may be permanently destroyed, and its splinters will damage the other components. The bearing should be replaced.	Starting at $40.

*Cautions! The listed price includes repairs only, it does not include the cost of spare parts. The final price will be revealed only after the diagnostics has been carried out.

It can be concluded that to delay with the elimination of the problem, because of which the washing machine jumps when spinning is in no case possible. It is necessary to apply for help to qualified specialists.

Our masters will diagnose your washing machine free of charge and will make a quality repair with further guarantees. After that, your washing machine will stop bouncing and vibrating when spinning.