Causes that the washing machine squeaks when wringing or washing can be different. The most frequent ones we will analyze in this article.
Squeak most often rubbing against each other parts. To detect them, it is necessary to disassemble the machine and conduct detailed diagnostics.
If the perimeter of the boot boot rubber is clean and the problem is different, it is better to entrust the setting of the machine to a proven master.
So what are the causes of the squeaky washing machine when washing and spinning?
-
The cause of the squeak in the washing machine? Wear of one or both springs. The tank of the machine hangs on special spring mounts, which lose their original properties during operation. Their joints with other parts of the machine begin to squeak. Both need to be replaced.
- Shock absorber wear occurs with unevenly distributed loading of shock absorbers, it is necessary to replace both. Causes can be long use or misalignment in the installation.
- Have you noticed that the drum in the washing machine squeaks? Do not avoid disassembly of the machine. In some cases, the packing may be damaged or it has dried out, then the bearings may rust and make a squeak or knock. The cause can be a worn drive belt from careless and long use of the machine, as well as from frequent overloading. It is stretched or loose and needs to be replaced. In rare cases, it can be adjusted.
Let's understand why you hear a squeak in the washing machine during spinning:
- This can occur when accidental objects hit and rub against the tank and other parts. For example, a coin or a sock may get caught in the door cuff. This object will not only prevent the tank from spinning freely, but will also jam it during future use.
- Creaking in the drum, especially often in washing machine brands Indesit or Candy, due to its imbalance. This happens after prolonged use, when the fasteners are worn, the shaft touches any part of the machine, it creates a squeak. This problem is solved by replacing the fixings of the drum shaft.
- It happens that during the spin, the loosened parts of the washing machine housing squeak. Specialist, check and tighten all the fasteners of the housing.
- Often the narrow machine squeaks when rotating the drum from the close location of the main parts and loose fasteners of the tank. The solution to this problem is also to diagnose and adjust the fasteners.
If your washing machine makes any extraneous squeaking noise when spinning, when washing, or when the drum rotates, contact a specialist by phone on the site as soon as possible, or leave a request to a technician, he will call you back!
