Imagine such a situation, you decided to arrange a global washing, loaded your washing machine with laundry, but there was a problem - the door of the washing machine does not close. You inspected it visually, at first glance did not find any reasons, but, nevertheless, the problem remained. So what is the reason that your washing machine does not close?
Of courseIn fact, the causes can be any number of reasons. But let us, in order to be clearer, let us divide them into two types:
Of course, Damage caused mechanically - with such damage, the hatch of your machine does not lock completely, that is, you can not hear the characteristic click;
- damage related to electronics - in this case mechanically the washing machine closes mechanically, but the electronic locking of the hatch does not occur.
If the problem is still related to electronics, then, as a rule, the display will show an error code. If this does not happen, then most likely it is a mechanical failure.
Let's figure out what to do.
Mechanical violations, because of which the washing machine does not close
| Signs of damage | Probable reason | The price for repair |
| The washing machine doesn't close all the way, as if something prevents it from closing completely. | There is distortion of fasteners on the door, and the head of the fixer can not get into the right groove. You shall check and retighten the door fasteners and remove the warping. | With your own hands. Or from $6. |
| The washer door is fine and holding level, but the locking head is skewed. Most likely the metal rod that holds the head in the correct direction has fallen out. You should disassemble the door and try to install the rod as it should be, or replace the entire handle. | Starting at $8.. | |
| The washer closes, but no latching sound is heard and the door does not stay closed. | Apparently, the plastic guide, which serves to close the machine door, is very badly worn. This part should be replaced. | Starting at $8. |
**Diagnostics We carry out absolutely free diagnostics, however if after its carrying out the refusal of repair, the client should pay 4$lei for a call of the master.
Now let's see what to do in cases where the problems are associated with violations of the electronics.
Why the washing machine hatch does not close
After it became clear that everything is okay with the mechanical components, you should look for the cause from inside the machine.
| Signs of damage | Probable cause | The price for carrying out repairs |
| The washing machine closes, but the hatch does not lock. | In all probability, the washer-dryer locking device has malfunctioned, the plates of which are no longer deformed due to wear. You should replace the device. | Beginning at $8. |
| It is likely that the UBL is dirty, or some foreign object may have gotten into the hole in the UBL. The unit should be disassembled and cleaned. | ||
| The control module has failed. In this situation, the reason is that the hatch locking device does not receive the command to lock it. The control module should be diagnosed. According to its results, it will become clear what will need to be done. | Starting at $12. |
Will it be possible to make repairs yourself if the door of the washing machine does not close? Of course, it depends directly on the complexity of the breakage and the level of your competence. If the problem is mechanical damage, then perhaps a simple screwdriver will suffice here.
After all, in spite of all the common and obvious signs of malfunction, the technician at takes into account his experience and the peculiarities of your washing machine. Special equipment allows you to make a quality diagnosis. the washing machine to be repaired. Everything will be done at your home, in the shortest possible time!
