Why is there water left in the washing machine after washing? Let's imagine this situation, you heard a beep from your washing machine, which means that the washing is finished, went to it, opened the hatch.and suddenly you find that there is water in the powder tray or the sealing collar. Or even worse, the machine has finished washing, but has not drained all the water from the drum, and as a consequence, the door remains blocked.
What should be done in such cases?
If the washing machine has water in the powder and rinse aid tray.
If you notice small amounts of residual water in the dispenser compartment intended for air conditionerIf you notice residual water in small amounts in the dispenser compartment for the air conditioner, there is no need to raise the alarm. But if water in significant portions remains in the compartments for the powder or rinse aid, then it is necessary to take the necessary measures.
To do this, let's find out the reasons why water remains in the washing machine:
- The detergent tray has been insufficiently monitored. We can conclude that in this case it is necessary to perform a little more frequent maintenance of the tray. It should be taken out and thoroughly rinsed.
- Incorrect installation of the washing machine. Probably, your washing machine stands unevenly, relative to the horizontal plane. It is necessary to make a correct installation.
- Are you sure about the quality of detergents you use? Perhaps the water in the washing machine after washing remains due to the poor quality of the powder or conditioner? Try replacing these products.
- Did you overdo the proportions? It could be that you put more powder than you should. It could clog the drainage channels. We recommend using measuring cups.
- The water pressure may not be sufficient. Check to see if you have opened the water inlet valve all the way. If so, there is likely a problem with your shared plumbing, contact your property manager.
| If there is water left in the washing machine in the gasket of the machine door | There is no need to worry, it is in the order of the day. All you need to do is wipe the cuff with a dry rag after each wash. |
| If water remains in the drain filter. | This situation also cannot be called a malfunction. If your machine is installed correctly, the drain hose is installed in the form of a loop. In this loop, after washing, water remains, and it enters the drain filter. There is no need to worry. |
| If the washing machine has water in the drum, the washing seems to be finished, but the door is blocked. | Check if it is possible that you have selected a washing program for delicate fabrics? Such a program provides a stop with water. If this is the case, just activate the drain mode. If the matter is not in the program, then, most likely, the matter is in the damage to the pump. Here already have to go to the professionals. |
| If the water got into the washing machine turned off. | First of all, you need to make a conclusion, what kind of water suddenly turned out to be in your machine. If the water has an unpleasant odor and cloudy appearance, then it means that it came from the sewer system and you should check the drainage system. If the water is clearly clear, then it came from the water supply and the problem is in the inlet valve. |
