Your laundry is in the drum of the machine, you select the necessary settings with a habitual movement, press "start" and go to do your business. But something is wrong: after half an hour of the usual light buzzing, suddenly complete silence. Oh, the horror, the washing machine has stopped with a full tank of water, no longer washes, but also does not rinse.
- Why your washing machine does not rinse the laundry?
- First, you need to check: the washing machine does not rinse or also does not spin?
- And if the washing machine does not rinse, although the programs of draining and spinning work in normal mode?
- As a preventive measure against such malfunctions, follow these simple rules:
Why does your washing machine not rinse the laundry?
What to do? The main thing is not to panic! Following our recommendations, you can easily figure out what happened to your assistant. And it may well be that with the help of simple manipulations you will be able to cope with the problem yourself.
To begin with, you need to check: the washing machine does not rinse or does not spin?
Try running the water drain program to figure it out.
If it did not help, and everything stands as it was, you need to check:
- Is the drain hose kinked?? It is possible that it is squeezed by something heavy or twisted, and the water just physically can not pass through it;
- Is there a sewer blockage? In order to check this, you need to disconnect the water drain hose from the sewage pipe (or siphon) and lower the bottom end of the hose into the tub, cabin tray or baby tub (in case there is no stationary tub). Next, you need to turn on the drain program. The water is quietly drained? Congratulations, there is no problem with the way your washer rinses the laundry! You just need to clear a clog in the course of the sewer pipe or clean the siphon. You can do this on your own.
You've done it? Now you can take out the laundry and either rinse and spin the old-fashioned way or put off the washing until the arrival of the wizard, who must be called for accurate diagnostics breakdown and conduct a qualified repair of your machine.
Below we have tried to collect all the main reasons why your washing machine rinses poorly, does not rinse at all or rinses with hot water (this also happens):
| Drain pump filter, spigot and/or drain is clogged | All kinds of small debris from what may have been inadvertently deposited in the pockets of clothes, as well as loose during the washing process, small threads, lint, when draining the dirty water goes into the pump filter. Larger debris is trapped in the nozzle. If the filter and spigot are very dirty, the water will simply stop flowing through them.
Remedy: The drainage system has to be cleaned. |
from 1200 p. |
| Drain pump is defective | This is another common reason why your washing machine won't rinse. If your machine is getting old or there is debris in the pump, it may just burn out.
Solution: replace the drain pump. |
From 1500 p. |
| Pressostat (water level sensor) breakage | This sensor monitors the actual level of water in the tank. On the basis of these data, the control module determines whether it is necessary to add water to the tank or on the contrary, to drain the water in order to proceed to the rinse/spin. Failure of this sensor causes the washing machine to rinse poorly the washing machine rinses poorly (or stops at all, as in the example we discussed above). Solution: the pressostat needs to be replaced |
From 1500 rubles. |
| Faults in the control board | Faults in the control module cause a variety of malfunctions in the system, in our case the washing machine does not rinse
Solution: reflash/replace control module |
from 1500 rubles |
* Please note that all the above prices are approximate and refer only to the work of the master. The cost of spare parts is calculated separately, depending on the brand and model of the washing machine. The final cost of repair master voices on the spot.
** Diagnostics is absolutely free in case of the following repair works by our expert. If you refuse to repair, you will have to pay 4$ for the call of the master.
And if the washing machine does not rinse, although the programs of draining and spinning work in normal mode?
It happens that you have selected the program of drain or extra rinse, and the water is gone. But the overall washing cycle still stalls at this point every time. Washing, of course, is impossible. There are two main reasons for such behavior of the machine:
| Broken heating element. | In this type of malfunction, the water is simply not heated to the temperature set by the program, so the washing stops. You can check this by touching the glass of the hatch with your hand (do not get burned at temperatures above 40°C) - if it is absolutely cold, and you put it on heating, then most likely this is the problem.
Solution: replace the heating element |
For more than 1000 rubles. |
| Control board malfunction | In case of errors in the control module, some operations during the program can skip or suddenly stop completely. It happens that after some "glitches" the work of the machine temporarily gets better, but it is better not to wait for the next time, but to eliminate the problem in time, so as not to face a much more expensive repair afterwards.
Solution: reflashing/replacement of module |
from 1,500 p. |
* Please note that the above prices are approximate and refer only to the work of the wizard. The cost of spare parts is calculated separately, depending on the brand and model of the washing machine. The final cost of repair master voices on the spot.
** Usually diagnostics is absolutely free in case of the following repair work by the specialist. If you refuse to carry out repair, it will be necessary to pay 4$ for a call of the master.
As prevention of such breakdowns, follow the following simple rules:
- Check your pockets well: remove any items, including small ones, before washing. If you come from nature, shake off all clinging debris from your clothes before washing, this will help keep the filters clean for a long time.
- Bad laundry detergent and scale-contaminated water can quickly ruin even the highest quality appliances. Use good powders and be sure to install water filters. Periodically arrange a rinse, the more so that now on the shelves of stores is not difficult to find excellent means to combat water hardness and scale removal. As a tip of the day, we can advise you an economical way to of descalingRun a 90°C program without any laundry by adding a little citric acid to the tank.
- To protect the electronic parts of your machine, don't forget to put it on a separate fuse when you connect it.
The quality of work is guaranteed, which means that your machine will please you with flawless operation for a long time.
