When you throw the cloths into the wash, set the program, press Start, it happens that the washing machine hangs... it also happens that the washing machine takes too long to wash... or suddenly it does not turn off...
There may be several reasons for this. We observe the execution of the program. Consider the main ones:
- If it takes too long water intakeand because of this washing machine washes longer, and this happens, there is a possibility that the machine is working, but the water supply is not, the tube is jammed or the water supply valve is covered. Check this point.
- The same process can be delayed due to clogged filters or suction tube, this problem makes the water flow weak. Clean the filters and strainers yourself, but contact a professional.
- Water intake can also be long if the water supply valve is defective. In this case, water simply stops flowing into the machine, or very weakly if the diffuser is not fully open. To fix this problem, contact to replace the inlet valve.
- The washer takes longer to wash, delaying time water drain? The main reason for this may be clogged drain membranes or clogged spigot. The filter, of course, can be washed and cleaned yourself, but the blowing of the hoses should be entrusted to the master.
- It happens that the unit does not start washing, but re-fills and pours water. There is a possibility of incorrect connection to the sewer, with this malfunction, the water from the washing machine drains itself and recoils. Why does the washing machine for a long time with such a malfunction? The water does not have time to heat up to the correct temperature. A specialist should be consulted for the correct connection.
- The same malfunction occurs when the water filling sensor (pressostat) fails. The machine does not receive information that the water level is sufficient, so it is filled and drained repeatedly.
- Water is repeatedly drawn in and drained due to water inlet gate failure. The washing machine bosch most often washes for a long time for this reason. Such a valve will need to be replaced.
- Washing can be delayed in the process of water heating. The main reason for this is often a strong scale on the heating element and requires cleaning.
If the heating sensor malfunctions, the "brain" of the machine receives incorrect data, and the heating process increases. A new thermostat is needed.- If the washing machine stops or gives an error during heating, it means that the heating element has burned out.
- If "freezing" occurs periodically, and then the washing continues, the problem is in the failure of the electric module or programmer. Solution: replacement or repair of the control board. (prices - here)
- It is also possible that you had a failure of electricity and could burn out the control module of the washing machine, for this reason it is necessary to repair or replace the "brains" of the washing machine.
If you have noticed that the washing machine is long washing, hangs up, makes incomprehensible sounds, contact a highly professional master right now!
