The belt comes off the drum of your washing machine. Causes and solution

In the process of washing machine operation it can happen a situation when washing is impossible because of breakage. Of course, there may be several reasons for the cessation of operation.

But, often on a washing machine the drive belt comes off. The problem is not terrible and solvable.

What is a drive belt

The drive belt is an important part in the washing machine. Thanks to it, the drum rotates, without which washing is impossible.

The belt is the connecting link between the pulley of the drum and the motor, and if it breaks or comes off, the machine stops working. The drive belt has a lifespan of many years with proper care of the machine.

You can. If the drum makes a scraping noise when it rotates and it turns easily by hand, then it is likely to be the problem.

Why does the belt come off on your washing machine?

At overloading of the drum There are cranking, which leads to a loose belt.

It happens that such a situation is repeated and constantly comes off the belt of the washing machine, then without professional diagnosis and assistance is impossible.

The most common causes of problems with the belt can be:

• Unreliable attachment of the drum pulley. The belt is bound to fly off or tear if the fasteners that hold the drum in place are weak and move from side to side. As a result. the drum may jam in the end.
• Problems with the motor mounts. As with the pulley, the fasteners may become loose and the belt may not have enough tension, causing it to slip. To solve the problem, you need to remove the back cover of the machine and tighten the fasteners. Reinstall the belt.
• Belt wear and tear due to prolonged use. The belt stretches from prolonged use and ceases to perform its function. The machine whistles and hardly squeezes when cranking. And sometimes the machine stops working at all.

• Bearing wear.. For this reason, the drum may sway and as a consequence of course comes off the belt on the washing machine. Probably need the help of a wizard with experience.

• Deformed shaft or pulley.. When the belt in the washing machine comes off, The pulley can bend and damage important parts of the appliance.

• Poor belt tension. If the drive belt is improperly tensioned or is the wrong size, it will inevitably fall off. When purchasing a belt, you should be guided by the manufacturer's worn belt or rely on the help of a professional.

• Infrequent use of the machine. It turns out that infrequent use is also the cause of problems with the drive belt, because it can dry out, crack and lose elasticity.

• The cross drum is loose. This imbalance is also a direct cause of a broken timing belt.

Belt replacement

For self-repair the algorithm of actions is as follows:

1. The washing machine is de-energized and disconnected from the water supply.
2. The back cover is removed.
3. The worn belt is removed. To do this, it is stretched on itself with one hand, and with the other turn the pulley and remove it.
4. The new belt is put on the motor shaft first.
5. It is stretched on the pulley in the same way rotating it.
6. The machine is assembled and the washing is started in test mode.

A person even without special training or experience can replace a worn belt with a new one by following the manual.