How to deal with a dirty washing machine tray without acid
The washing machine is an indispensable helper for any family. At its services we resort to almost every day. Like any technique, it needs care and proper maintenance.
Some people notice it when something goes wrong with the machine. They start reading and looking on the internet for possible causes.
One problem that everyone can have is a dirty laundry detergent tray.
General information
This problem can be seen with the naked eye. The tray may be covered with lime scale, rust, or mold. An unpleasant odor of rot or mustiness may accompany these signs.
All of these can cause the tray to break. The washer will have to be replaced.
How to easily deal with a dirty washing machine tray without acid?
In this article, we will look at this problem from all angles.
Details
Prevention
The best option is to systematically air it out and wipe down the drum and powder compartment with a dry cloth.
But if the powder tray still gets dirty, has a deposit or mold, a more thorough cleaning is required. This will require effort and time. Plastic can absorb rust and change its color.
There are "craftsmen" who use plumbing products to clean the tray. I found a couple of articles on the global network with tips on how to clean the tray with Domestos. This is extremely dangerous for the equipment. You risk turning the tray into a sieve. You won't be able to wash it completely from the chlorine products. 100% will remain the smell of chlorine, which will smell the laundry.
There are articles on the Internet where they use vinegar or acetone for cleaning. I do not recommend the use of these substances. They will harm your washing machine and you. The pungent, unpleasant smell from vinegar is dangerous to your health. Acetone can corrode plastic.
The method of cleaning with acetic acid is also not recommended
Important: Any acid is harmful to plastic. Failure of the powder tray will force you to change the washing machine, buy a new one.
To prevent this from happening, use a more gentle means.
It is much safer to clean the powder tray with hydrogen peroxide. This cheap and relatively safe product is available in every home.
Hydrogen peroxide can handle even stale dirt, has a bleaching effect, and will not harm plastic.
There are many videos and articles on the internet describing this method.
Steps of cleaning the powder tray with hydrogen peroxide
- Remove the tray from the washing machine. To do this, you need to gently press the PUCH button, which is in the tray and pull it forward. If the design allows the tray to be disassembled, this should be done.
We will need the following inventory: a container in which the tray will fit. A basin is ideal. A sponge, a rag and an old toothbrush. This is needed to apply the cleaning agent mixture to the tray.- Preparing the cleaning mixture. In a plastic container, mix 100 ml of 3% hydrogen peroxide and 6 tbsp of baking soda. Add to this mixture a little finely chopped laundry soap. You should get a sour creamy paste. The cleaning composition should be thick and foamy.
- Applying the cleaning mass on the tray. You can use a sponge or cloth. Whoever is comfortable. I applied it with an old toothbrush. It is necessary to distribute the mass over the entire surface and leave it for 30 minutes.
- Then wipe the tray with a damp cloth or sponge, rinse under running water and leave to dry.
The result is a clean, tidy detergent tray. Once the tray is dry, you can put it back and enjoy washing.
If you face the problem of a dirty powder tray, use safe products. It's up to you how long your washing machine will last.
If this article was helpful - I will be glad.
