You decided to wash things, closed the door, but then the error te appeared on the indicator, and your washing machine became in a stupor. Or the machine pumped water, rotated the drum and stopped after 5-10 minutes when it began to wash, showing the same thing. The tE error is common on all machines, indiscriminately.
If you have an old-fashioned machine Samsung, it will pay attention with the possibility of indication. The temperature LEDs "BIO 60 ° C" and "60 ° C" will be lit, and the indicators of washing modes will glow.
Frequent errors on Samsung and error decoding
In addition to all of the above, it can also show the code tE1 / tE2 / tE3. These problems are only in machines with dryer, and shows after spinning, before the option of drying things.
Errors te in a Samsung machine let you know that there were problems with the temperature sensor. Your technique "does not show" it at all, or takes the wrong data. For it "does not know" how and what.
Ideally, the error code te is a thermosensor error. The error ec is a copy of te for the old year Samsung appliances. Error information te notifies you if the temperature is less than 0.2 V or more than 4.5 V.
Pay attention!
At Samsung with drying capability, besides water problem tE, there are problems with other temperature sensors - tE1, tE2, tE3. Notifying about problems with drying indicators, being at any moment of drying mode.
- tE1 voices a dryer thermistor error, the machine is receiving an emergency message or the thermistor "shows" the wrong data.
- tE2 indicates error in blower housing sensor, does not alert in an emergency or temperatures are very high.
- TE3 shows error of condensate flow sensor, which is during drying. It shows too high temperature or does not show anything.
The main variety! The te error shows immediately when the machine is switched on or during the first washing stage before the water is heated. Codes tE1 / tE2 / tE3 show only at the end of washing and spinning, before or during drying.
According to the experience of the service specialists, the code Ес / tE / tc / tE1 / tE2 / tE3, usually verbalizes the problem of the machine, only in rare cases it is possible to change something by yourself.
Error te / tc / ec / tE1 / tE2 / tE3 - in which cases you can fix it yourself:
Master module failure. 
- Sometimes this happens, the error is random, any device is capable of "lagging". It is possible to fix it by "resetting" by reconnecting the machine with the socket. First of all, turn off the machine, then remove the plug from the socket. Wait a while with a cup of coffee, then put everything back and restart the machine. If it was an ordinary "lag", nothing else should happen.
- Bad connection of the contacts. It is possible that the contacts of the temperature sensor or the heating element are disconnected, this happens if the machine was moved to another place, for example, when moving. Jiggle the contacts of the wires, make it tighter, as if you are shoving something very far with difficulty. If breakdown was in this variant, then the car will definitely work.
- Faulty sensor reading. It happens that the sensors lie, that the temperature of the monitored units is too high. On individual sensors in machines, you can reset the readings. If the error was in this, after repair everything will be fine.
Frequent malfunctions that need to be repaired:
| The first sign of the error | Probable cause of appearance | Repair or replacement | Price (parts+master's work) |
Samsung washing machine:
|
The cause is usually caused by the defect of temperature gauge thermistor of the liquid in the machine. | You may need to change the sensor.
Usually it is not that easy to change it, so the only thing left is to change the heating element. |
From 2450 to 4950 rubles |
| Samsung washing machine when washing in certain modes does not heat water and shows te malfunction after 5-15 minutes start of washing Then all stops. | Out of order (TEN). | If necessary to replace the heating element with another working one. | From 3100 to 4950 rubles |
| Samsung washing machine:
|
Does not show signs of life of the washing machine's master unit. | If the master unit is broken, then the connection is made by soldering the contacts, that is, you only need to repair the board.
If after that nothing works, you must change the entire control module. |
Repair - from 3400 to 5000 rub. Replace - from $ 65. |
| As soon as you turn on the machine the hatch stops, but immediately shows error te, and the washer stops working. | The wires connecting the heating element with the thermistor and the control module are damaged or the wires at the connection points are burnt.
In private areas of residence, mice can cause the problem. |
You need to twist the broken wiring or maximally change the loop with the guts.
If there is a problem with the contacts, to work, you need to completely change the wires. |
From 1450 to 2950 rubles. |
| Samsung machine notifies te error:
|
The dryer heater sensor is out of control. | If the sensor is separate, it simply needs to be replaced. If the sensor is part of the dryer heater assembly, then without a choice, you'll have to replace the entire heater. | From $2,450 to $69. |
| The machine says te error after a few minutes once drying has started and immediately stops. | The temperature reading of the fan housing does not function. This is usually caused by a short circuit in the element. | It may be necessary to change the fan housing thermistor. | |
| After the start of drying, after a few minutes, everything shuts down showing an error te. | The drainage sensor is defective. | It is necessary to change the condensate flow thermistor. | |
| After you have turned the machine on, after a moment the error te is displayed and the selected washing option is stopped. | Broken wiring or maybe contacts drying temperature, fan, or maybe condensate flow indicators. Sensors are blind for monitored nodes or do not show the data to the control module.
Contacts are frayed due to high humidity, if machine is not drying or drying poorly. Cutting of wires is possible by mice if the machine is installed at a private residence or in a basement place in the house. |
It is necessary to twist the problematic part of the wiring or change them completely.
If there is a problem with the contacts, you need to partially clean them, if that doesn't help, replace them completely. |
From $14 to $29. |
Spare parts for washing machines you can find at
