Errors 4C, U1, 4E - appears when there is a problem with the water supply in the Samung

 You have loaded the laundry in the drum with a habitual movement, poured the powder.selected the washing mode and pressed "start". But your machine for some reason does not want to take in water.and the error code 4E appeared on the display. Or even worse, the machine refused to work during the washing process

E1, 4C, CE,4E Samsung washing machine error

• If your Samsung washing machine is not equipped with a screen, this error is indicated by the burning of the temperature indicator of the washing mode in cold water and flashing of all mode indicators.
  

  What does error 4E mean?

  All four variants of the code light up only one thing - there was a malfunction in the system water intake. Usually the code E1 is present in older versions of washing machines. All this means that if the machine could not get the right amount of water for the first level in two minutes after the start of washing, or within ten minutes did not get it completely, then the washing can not begin.

  You should not be upset in advance. In our experience, there are various cases, and we can notice that more often than not, ordinary inattention is to blame for the lack of water intake.

  It is possible to eliminate the error 4E on your own in the following cases:

  • Perhaps there is no water in the water supply or the pressure is not strong enough.
  • Maybe you forgot to open the valve in the water system.
  • Is the aquastop damaged? It may have leaked and the control module is blocking the water supply. You may have to replace the hose.
  • Are you sure that the filter
    

    

    of the intake valve is ok? It may be worth cleaning the strainer, it may be a small part, but it affects a lot of things.

  • The problem may also lie in the control unit of the machine. You should try to give it a "rest". Disconnect the power for a few minutes and turn it on again. This option may help if the error occurs for the first time.
  • Are you sure that the electronics are working properly? Perhaps it is the problem. You should check all connections and contacts that are related to the water system.
  • In case your machine is at the same time draws and drains water at the same time, check if the drainage system is properly organized. Probably the connection point is below the level of the tank.
  If you have done all of the above, but the display of your Samsung machine still shows error code 4E, it means only one thing - it's time to call for help from a competent specialist.

  Possible disorders to be repaired:

  Symptoms of the appearance of the error	Possible cause	Replacement or repair	Price of work and consumables
  Error 4e is lit, the machine can not take on water.	The inlet solenoid valve has exhausted its service life. It does not open normally, water cannot enter the machine.	The water inlet valve should be replaced.	Starting at $2,900 to $55.
  Error 4e on the washing machine samsung appears either at the beginning of washing, or in the process of rinsing.	Broken controller - control unit.	The solution depends on the complexity of the breakdown. It may be possible to repair the block, but it may be necessary to replace it.	Repair - beginning at $3800 and ending at $55. Replacement - starting at $70.
  After pressing the "start" button, the machine water does not come in.. Error 4e is lit.	The water level sensor is defective. This could be because the pressure hose: Clogged; It has come off; Damaged. If the sensor itself is to blame - error 1e is lit.	Action is required, appropriate to the cause of the malfunction.	Starts at $1,400, ends at $35.
  The machine failed to get water, error 4e popped up a few minutes after starting.	The culprit was the wiring from the intake valve to the control box.	The solution depends on the complexity of the fault. You may be able to fix the block, but you may have to replace it.	Starting at $1,500 and going up to $29.

  **These are the prices for repair and also include the cost of consumables. The total cost can be determined after diagnosis.

  If you can't cope with error 4e, e1, 4c, che on your Samsung washing machine by yourself, you should ask for help from the masters

• During the conversation you can find the most convenient time for you to come to a specialist who will hold a free diagnosis and carry out high quality and fast repair.