It is worth noting that today any household appliance manufactured by Samsung is quite popular not only among the residents of Russia, but also around the world. Ensure a steady growth in sales of the company Samsung succeeds due to a wide range of products for any purse and with absolutely any specifications. Technique has long been able to prove itself as extremely reliable in many situations, but even it in some cases can fail, which is inherent in any technique. Often there is a situation where the washing machine Samsung does not turn on, which can be faced by almost any user.
There are situations when this situation indicates a serious breakdown, but often the main cause of the malfunction is precisely the poor state of communications in the house.
General Information
It can be very simple
On a note! If the washing machine does not turn on at all, do not rush to panic. There may be reasons for this, which are simple to fix.
Before looking for the necessary tools and disassemble the washing machine, it is necessary to identify all external factors that affect the performance of the design in a certain way. If the machine does not turn on or clicks that is, there is no indication (the display is not lit) and, accordingly, there is a zero reaction to button presses,
then it is recommended to do the following:
- It is necessary to make a preliminary check on the availability of electricity in your home;
- Check that the power outlet is working, which can be done with any type of electrical appliance;
- If the connection is made using an extension cord, be sure to check that it works;
- It is necessary to check the safety cutoff device, which can block the power supply to the washing machine;
- When using a stabilizer to connect through it the washing machine, it must be checked.
On a side note! The washing machine can stop turning on after a power surge.
There is also a variant of occurrence of other information, when the washing machine turns on, but the washing itself, however, as well as any other program, does not start. Or the Samsung washing machine turns on and immediately turns off. The reason for this tendency is also often not inside the design of the machine itself.
To check it, it is rational to perform such simple enough actions:
- Make sure there is water present in the plumbing at this time;
- Check not only the sewer, but also the drain hose for possible blockage;
- Open and close the manhole again;
- It is necessary to control the entire process of laying the laundry, as well as to determine its compliance with its weight.
If after you have carried out the above actions, your washing machine still did not start working normally, it is worth disassembling it and finding the part that is broken. It is worth understanding that the work of this type is quite complex, so you need to judiciously estimate your strength and in the absence of proper knowledge call the master.
The main types of breakages
Before you disassemble the construction of the washing machine, it is necessary to prepare the necessary tools. To repair the washing machine you need relatively little, namely: a few keys and screwdrivers for disassembly, as well as a multimeter to check the parts. It is obligatory to disconnect the washing machine from the power supply. If the construction is located in a small place, it is worth changing it to allow for normal operation.
Power plug with wire
To begin with, it is worth making sure to inspect the plug, that is, first make a visual inspection, and after that test the cable. To check the functionality of the cable, you need to switch the multimeter directly into resistance measurement mode and in turn perform a ringing of the core itself. In the case where the instrument shows an infinite value, then it is necessary to replace the cable.
Button on
There are a number of models of washing machines manufactured by Samsung, where power goes directly to the button. When its movable contacts fail, for example after oxidation, it can be the reason that the machine does not turn on. In this case, it is necessary to ring the button. For this purpose, the test is performed first in the switched-off state and then, respectively, in the switched-on state. If the part is broken, it is not electrically conductive when switched on and must therefore be replaced.
Noise Filter
The filter is also often the reason that the washing machine has Samsung does not turn on the washing. The task of this part is to ensure that the household appliance is fully protected from interference during its operation. If the interference filter fails, it prevents the washing machine from turning on.
The design of the filter is a barrel with 5 pins. Three of its pins are input, that is, phase, zero and ground. Correspondingly 2 on the output are phase and zero.
To test the filter you can apply voltage directly to its input and check if there is voltage at the output. It is important to understand that in spite of the high speed of this test it is quite dangerous. That is why it is rational to perform a simple "ringing" using a multimeter.
